Publicité
Les langues disponibles
Les langues disponibles
Most of the TV channels do not transmit clock
information. There are a few cable channels who do
but they are at the end of the channel ring. There is
no clock transmission in antenna channels. In such
cases, either clock extraction takes a long time, or
there is no clock.
English_DFU_37131.indd 13
All manuals and user guides at all-guides.com
Source
This menu allows you to name/label the accessory devices you have connected to the
external inputs/outputs.
Select
in the Setup menu.
Source
&
Press the cursor right to enter the list of types of devices connected to the selected
é
input.
Select the accessory device with the cursor up/down.
"
When you select
allowing you to identify which type of accessory device is attached to this input.
The TV detects the presence of the connected device and the signal is routed
appropriately.
The TV can output Digital audio via the
connector to an external amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital Audio In, you can
connect it with a single cable to the TV's
See Connect Accessory Devices, Digital Surround Receiver, p. 23.
Clock
This allows you to use your TV as a clock.
Note:
- Adjusting the clock is necessary for the correct working of Lock after (See TV settings, Channels,
p. 17) features.
- Closed captioning will not be displayed when the clock is being displayed. Press the clock
key again to switch off the clock if you want to see closed caption.
Auto clock mode
Select
in the Setup menu.
Clock
&
Press the cursor right to select the
é
Press the cursor right to instruct the TV to get the time automatically or manually.
"
Auto clock channel
With the cursor buttons, select the channel number where time can be found by the
TV. Typically time can be found on PBS as well as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu
item can not be selected.
Time - Day
(only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If
Auto clock mode Manual
the system will keep the entered time and day.
Time zone
(only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time
information will correct the clock display for your local time.
Select
Time zone
&
Press the cursor right to select your local time zone.
é
Daylight saving
(only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcasted signals. This menu
item allows you to disable the automatic setting of daylight saving time. This is useful
if you live in an area or state where daylight saving is not applied, but you receive
channels from other areas where daylight saving signals are broadcasted.
Select
Daylight saving
&
Press the cursor right to select
é
daylight saving time, based on specially broadcasted signals.
Select
Off
to disable automatic clock correction based on the specially broadcasted
"
signals.
13
,
,
,
,
Side
or
AV1
AV2
AV3
HDMI
DIGITAL AUDIO OUT(SPDIF OUT)
DIGITAL AUDIO OUT(SPDIF OUT)
Auto clock mode
(only available when Auto clock mode is set to Automatic)
has been selected, and no clock search has been done,
with the cursor down.
with the cursor down.
for automatic clock correction for
Automatic
Analog Audio In
, a list appears
.
.
2006-03-29 6:30:52 PM
Publicité
