Power Fist 8340515 Mode D'emploi page 2

V 2.9
Powerfist 18v Ni-Cd 3/8 in.
Cordless Drill
SPECIFICATIONS
Variable Speed
Speeds
No Load Speed
Reversible
Torque Settings
Spindle Thread
Chuck Size
Chuck Type
Battery Size
Battery Type
Charge Time
CETL
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and / or damage to the equipment. Before allowing someone
else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. Common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
NOTE: Keep this manual for the safety warnings, precautions and operating, inspection and maintenance
instructions. When this manual refers to a part number, it refers to the included parts list.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit.
2. Keep anyone not wearing the appropriate safety equipment away from the work area.
NOTE: Minimize distractions in the work environment. Distractions can cause you to lose control of the tool.
3. Always lock up tools and keep them out of the reach of children.
2
Yes
2
(low) 0 to 400 RPM / (high) 0 to 1,150 RPM
Yes
21
3/8 in.
3/8 in.
Keyless
18 volts
Ni-Cd
1 hour
3101943
For technical questions call 1-800-665-8685
8340515