Francis Francis illy Y1.1 Touch Manuel D'instructions page 19

To switch the machine off, move the main on/off switch
"M" into the "0" position; never disconnect the plug from
the power outlet when the machine is switched on.
CUP STAND ADJUSTMENT
The machine is designed to be used with either mugs or
espresso cups.
To adjust the height of the cup stand "H" you must remove
it by pulling it out and then set it in the mug or espresso cup
position.
Optimal position for mugs, suitable for "long" espresso.
Optimal position for espresso size cups.
Note: the height of the cup stand "H" must be adjusted before
you start dispensing coffee.
All manuals and user guides at all-guides.com
19
MAKING COFFEE
The machine is designed to make coffee exclusively with illy
"Iperespresso" capsules.
Other types of capsules cannot be used, as they could da-
mage the machine.
Make sure that the buttons
Unlock and lift the opening lever "A" of the capsule compart-
ment "B".
Note: if a capsule is present in the compartment "B", it will be
automatically expelled when the compartment is opened. The
capsule must slide easily into the compartment; if this is not
the case take it out and reposition it correctly.
EN
and are steadily lit.