Black & Decker X2210 Mode D'emploi page 6

ENGLISH
Warning! Never fill above the maximum
filling level indicated on the beaker
provided. Normal tap water can be used,
but if you live in a hard water area the use
of distilled water is recommended. Do not
use chemically de-scaled water.
Use
Warning! Do not leave the appliance
unattended while it is connected to the
power supply and during the cool down
period.
Temperature setting
The required temperature setting depends
on the garment fabric.
• Adjust the temperature control dial to
the required setting:
- •Synthetics
- •• Silk/wool
- ••• Cotton/Linen
If you are unsure of the fiber content of a
garment: start with a low temperature
setting and test on a small area (seam or
inside hem). If wrinkles remain, gradually
increase the heat setting until you find the
optimum setting.
Using as a dry iron
• Stand the appliance on its heel rest.
• Plug the appliance in and switch on.
• Set the steam control to the no steam
position.
• Adjust the temperature control dial to
the required setting.
6
All manuals and user guides at all-guides.com
The heating light will switch o when the
appliance has reached the required
temperature.
Using as a steam iron
• Fill the water steam tank as described
• Stand the appliance on its heel rest.
• Adjust the temperature control dial to
• Plug the appliance in and switch on.
• The heating light will switch on.
• To create steam, set the steam control to
Using the steam burst button
The steam burst feature can only be used
whilst ironing on a high temperature setting.
• Make sure that there is water in the tank
• Lift the appliance and press the steam
Self Clean
The self-clean function must be used before
using the appliance for the first time and
then regularly to remove scale.
• Fill the tank to the maximum filling level.
• Set the temperature control dial to the
above.
the required steam setting.
Readiness for use is indicated by the
colour of the heating light.
the steam position.
and the temperature control dial is set to
the high steam position.
burst button. You may need to press a
few times to activate the pump.
max position.