Publicité
Les langues disponibles
Les langues disponibles
FIXED WALL MOUNT FOR LCD, PLASMA, and LED DISPLAYS
English
SPECIFICATIONS
Display Size: 26" to 46"
Maximum Load: 45 kg (100 lbs)
Mounting Pattern: 400 mm x 400 mm (15.7" x 15.7") max
Profile: 2.8 cm (1.1")
BOX CONTENTS
Wall Plate (x1)
Mount Arm (x2)
Instruction Manual (x1)
Hardware Kit (x1)
WARNINGS
1.
Read these instructions before you begin. If you are unsure of any part of the process, contact a
professional contractor or installer for assistance. Improper installation can result in injury or damage.
2.
The wall or mounting surface must be capable of supporting the combined weight of the mount and
the display; if not, the structure must be reinforced.
3.
Locate pipes, wires, or any other hazards in the wall where you wish to install the mount before
drilling.
4.
Safety gear and proper tools must be used. Failure to do so can result in injury or damage.
5.
Two people are recommended for installation. Do not attempt to lift a heavy display without
assistance.
6.
Follow all instructions and recommendations regarding adequate ventilation and suitable locations for
mounting your display. Consult the owner's manual for your particular display for more information.
CAUTION: This wall mount is intended for use only with the maximum weight of 45 kg (100 lbs). Use with heavier
than the maximum weights indicated may result in instability causing possible injury.
TOOLS REQUIRED
Phillips Head Screw Driver
Electric or Portable Drill
3 mm (1/8") Drill Bit and Stud Finder for Drywall Installation
8 mm (5/16") Masonry Bit for Concrete Installation
Level
2
RHTB-11003 User Manual
Publicité
