Philips Game Elements GGE633 Mode D'emploi page 7

Display
1 2
6 7
OPEN/
ENTER
CLOSE
SHUFFLE PROGRAM
ANGLE
REPEAT
MENU
RETURN
Audio CD Shuffle Play:
This feature enables track playback in random
order .
1) Select the audio CD icon on the screen and
press the X button.
2) Press the SHUFFLE button.
3) Press the PLAY button.
Note: To clear press the SHUFFLE button until
the display goes off. You can also play random
tracks repeatedly by pressing the REPEAT but-
ton during Shuffle Play. To clear the function
press the CLEAR button.
Audio CD Repeat Play:
This function enables repeat play of all or one
of the tracks.
1) Select the Audio CD icon on the screen and
press the X button.
2) Press the REPEAT button. Select the track
you want to play by using the directional
pad on the Wireless 2. Then press REPEAT.
3) Press Play button.
Note: To clear Repeat press repeatedly press
the REPEAT button.
DVD Function Chart
CARE FOR THE UNIT AND TROUBLESHOOTING
The Wireless 2 is an electronic unit and should
be treated with care when handling. Philips
recommends that you do not disconnect or
All manuals and user guides at all-guides.com
3 4 5
8 9 10
RESET
CLEAR
TOP MENU
TIME
A B
connect the Wireless 2 to your PS2 game con-
sole when the system is switched on. We also
recommend that you do not store the unit in
direct sunlight or at extreme temperatures, or
spill any liquids on the unit. Finally, do not open
the case of the Wireless 2. Maintenance and
servicing should be done by Philips
Accessories only.
If you are experiencing difficulties with your
Wireless 2 , please check the following:
Game Pad Related
Not Working: Make sure the Wireless 2 receiv-
er is plugged firmly into your PS2 game con-
sole. Try turning off the console and removing
and reinstalling the receiver. Turn Wireless 2
game pad off then on again.
Not Performing Functions Properly: Turn the
power off on the game console, disconnect
and reconnect Wireless 2 receiver. Make sure
mode is selected.
DVD Playback Related
Doesn't work:
1) There is an obstacle between the controller
and the receiver dongle or IR port.
2) Operation distance is to far.
3) Make sure 3 AA batteries were installed.
My system turns on but there is nothing on
the TV:
1) Verify AV cable is connected from the con-
sole to the TV and securely in place in both
connections.
My Wireless 2 Controller does not respond
while in the system menu:
1) Verify which PS2 you own by looking at the
back of the console. You will note a model
number near the Sony name. Only the