Publicité
Les langues disponibles
Les langues disponibles
ANALOG BUTTON
Use to switch between digital and analog. In
the digital mode the controller will act like the
original Sony
®
controller for PS2. The analog
sticks will operate the same as the directional
pad. The L3 & R3 buttons are not active. In the
analog mode you will have more accurate con-
trol over your movements. The LED light on
the Analog button will be illuminated when
Analog function is on.
Note: Always refer to the software you are
using for the suggested modes of play.
SLEEP AND WAKE UP MODE
In order to preserve battery life the Wireless 2
pad has a sleep and wake up mode built in. The
pad will enter into Sleep mode after 3 minutes
of inactivity. Please note the following points
regarding the feature:
• Wireless 2 pad will enter sleep mode after
2 minutes of operation
• To wake up Wireless 2 pad press any but-
ton such as R1, R2, X. Pad will resume
operation after 3 seconds
DVD FUNCTIONS AND OPERATION For use
on PS2 Versions-SCPH-50001 and 70012
You can access all the basic DVD player func-
tions found in the PS2 by using the Wireless 2.
For detailed explanation of the each function
see the included chart. The PS2 SCPH-50001
and 70002 are the newest PS2 consoles with
progressive scan and other new features.
These consoles have a built in integrated IR
receiver and therefore can be controlled right
from the Wireless 2 game pad when pointed at
the IR receiver on the console. If operating with
the PS2 version SCPH-50001 you can have the
DVD tray EJECT/CLOSE right from the
All manuals and user guides at all-guides.com
Wireless 2.
NOTE: Some functions of the DVD playback
will operate from some of the external buttons
found and labeled on the controller such as the
fire and shoulder buttons.
Setting up the remote and starting DVD
Playback
1) Press main power switch on the PS2 con-
2) Press the reset button of the Wireless 2
3) Press the open/close button on the
4) Place the DVD in the PS2 console tray
5) Press the open/close button and the tray
Ending DVD Playback
1) Press the open/close button on the con-
2) Remove the disc from the PS2 tray.
3) Press the open/close button on the con-
4) Press and hold down the reset button. The
Note: Consult the chart for all other button
functions.
Installation and operation when using PS2
Versions SCPH-30001 to SCPH-39001
(Dongle Required)
In order to use the Wireless 2 Game Pad with
the older PS2 consoles, "you must keep the
included receiver dongle connected". Use the
below installation and operation procedure:
sole rear or front depending on which ver-
sion you have to turn the console on.
control pad.
Wireless 2 control pad (PS2 model SCPH-
50012 only) or manually on the console.
will close (SCPH050012 only). DVD con-
tent on the screen will appear.
sole or Wireless 2 game pad.
sole or Wireless 2.
PS2 "On" LED turns red and enters stand
by mode.
Publicité
