Philips Game Elements GGE633 Mode D'emploi page 2

PS2 Wireless 2
Control Pad-DVD Remote
Model #GGE633
IMPORTANT: Before using this product please
read the PlayStation 2™ video game system
instruction manual for safety, health and other
information.
INTRODUCTION
Congratulations on purchasing the Wireless
2™ Control Pad-DVD remote for use with the
PS2 game console. You now can experience
total control over your console. The Wireless 2
is equipped with integrated DVD functions hid-
den under the retractable panel so no other
remote is needed when you want to play DVD
movies. Please familiarize yourself on the func-
tionality by reviewing these operational
instructions.
Technology Features
A) 2.4 GHz Wireless technology with 27
Function IR Integrated buttons for DVD
playback
B) Built in auto switching when using two or
more wireless controllers together
C) Up to 50 Foot operational range
Functional Features
A Two (2) fully pressure sensitive analog con-
trol sticks-Left / Right
B) Four (4) fire buttons -
C) Four shoulder fire buttons (R1,R2,L1,L2)
D) Start / Play / Pause button.
E) Select / Display button
F) Illuminated Analog Button
G) 8-way directional control pad
H) On / Off switch
I) Under panel DVD functions
All manuals and user guides at all-guides.com
COMATIBILITY
The software used will dictate the functionality
of the controller buttons. See the controller set
up in the software instructions for more
detailed information. Some of the under panel
DVD functions are only compatible for use on
the PS2 model numbers SCPH-50001, and
SCPH-70012.
INSTALLATION AND SET UP
1) Remove the battery cover on the back of
2) With the game console off connect the
3) Turn on the game console and switch on
OPERATIONAL NOTE: Use only new batteries
together. Do not install new and old batteries
together as functionality problems may occur.
Remove batteries if pad is going to be left for a
long period of time or voltage is low. Wireless
2 is not Dual Shock™ vibration compatible.
the Wireless 2 Controller and install 3 AA
batteries (Not Included) into the compart-
ment. Make sure to install the batteries with
the polarity direction in the proper manner
(+ -).
controller receiver into player port one or
two.
the Wireless 2 game pad. A Red LED will
illuminate on the receiver signifying the
receiver is powered. The Green LED on the
receiver will illuminate and notes when the
controller and receiver are synchronized.
The receiver will flash if scanning for the
controller.