Philips Game Elements GGE633 Mode D'emploi page 4

L2 Button
L1 Button
SELECT
Bidirectional
Buttons
Subtitle
Options
Setting up the Wireless 2 and starting DVD
Playback
1) Make sure the receiver dongle is connected
into player port 1 on the PS2 console.
2) Manually press main power switch on the
PS2 console rear to turn the console on.
3) Manually press the reset button on the PS2.
4) Manually press the open /close button on
the PS2 console front.
5) Place the DVD in the PS2 tray.
6) Manually press the open/close button on
the PS2 console and the tray will close.
DVD content will appear on the screen.
Note: Consult the chart for DVD button func-
tions. No memory card or software is required
to operate the Wireless 2 Controller. Some
functions noted in the included chart will not
be compatible on the SCPH-30001 to SCPH-
39001 PS2 consoles and will need to be man-
ually performed.
Ending DVD Playback
1) Press open/close button on the PS2 con-
sole.
2) Remove the disc from the PS2 tray
3) Press the open/close button on the PS2
console.
All manuals and user guides at all-guides.com
Analog
4) Press reset button on the console. The RED
Viewing / Listening Options
Familiarize yourself with the Keypad Function
chart as it notes what each button does. To
help enhance your experience with your
Wireless 2 Control Pad and PS2 console
please review these viewing options:
Playback From last stopping point:
1) During the playback, press the stop or O
2) Press the play button on the control pad
Playback In Desired Order:
This function enables you the set the DVD to
play scenes in whatever order you like by
arranging the order of the titles or chapters on
this screen.
1) Press the PROGRAM button.
2) Select the item number and press the X but-
3) Use the directional buttons to select the
Reciever
R2
START
light on the PS2 turns red and enters stand
by mode.
button on the Wireless 2 Control Pad to
stop play.
panel.
ton.
number of the title that includes the desired
Button
R1 Button
MENU
STOP
ENTER
TOP MENU
Audio Options