Miles Industries Valor H6 Serie Directives D'installation

DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
The 1440 trim is intended to be used on Valor heaters
models 1400. Mounting of the 1440 does not affect
clearances or other specifi cations listed in the heater
installation manuals—see installation manual supplied
with the heater for more information.
47-5/8" (1209 mm)
1-1/2" (38 mm) between bottom
of appliance and bottom of trim
4005086-02
© Copyright Miles Industries Ltd., 2016
All manuals and user guides at all-guides.com
H6 S
1440 Four-sided Trim Kit
Use with Valor 1400 Models only
Installation Instructions
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
ERIES
Note: Mounting of this trim allows for non-combustible
material up to 3/4" (19 mm) thick installed over top of
the required 1/2" (13 mm) cement board. For thicker
fi nishes, refer to appliance manual.
Linerbox bracket
LH door
Overview
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
1400 engine
Steel front panel
RH door
Plinth
Barrier screen