Kicker KPB1 Manuel D'utilisation page 14

Install the included remote control to your steering
wheel as follows:
1. Slightly pull out the mount tab on the back of the
KPB remote and slide the remote onto the strap as
shown below, firmly pushing until you feel a click. The
Remote may be removed from the mounting clip and
strap using a slight twisting motion.
2. Place the KPB onto the wheel facing the user in
the position in which it will be most used. The remote
may be latched to the mounting strap in 4 different
configurations.
3. With the latch facing the front of the remote,
place the two arms of the remote control around the
steering wheel.
4. Pull the latch down over the open slot on the
adjacent arm.
English 13