Publicité
FEATURES AND CONTROLS
A
C
B
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to select forward
and reverse speeds (see Figure 2). To shift, move speed se-
lect lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe damage
to the drive system.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage push down, to disengage re-
lease.
C. Chute Rotation Switch — Used to rotate the discharge
chute to the left or right.
D. Deflector Control Switch — Used to control the angle of the
chute deflector (up or down).
All manuals and user guides at all-guides.com
K
D
J
I
10
E
G
2
1
F
H
E. Easy-Turn
TM
Traction Control — When engaged, allows the
operator to release one drive wheel, but allows the other
wheel to continue driving for easy turning.
TM
F. Free-Hand
Control — After engaging the traction control
(left hand) and auger control (right hand), allows the operator
to release the auger control lever to use the other controls.
G. Traction Control Lever — Used to propel snowthrower for-
ward or reverse. Push down to engage, release to disengage.
See also, "Free-Hand Control".
H. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
I. Skid Shoes — Used to adjust the ground clearance of the
auger housing.
2
1
1
2
Figure 2
Publicité
