Publicité
Les langues disponibles
Les langues disponibles
Use the NETWORK WAN screens if you need to configure WAN 2. You can also configure load balancing
between the WAN connections.
3 Bridge Mode
When you set the ZyWALL to bridge mode, it functions as a transparent firewall. Do the following to set the
ZyWALL to bridge mode.
1 Click MAINTENANCE in the navigation
panel and then Device Mode.
2 Select Bridge and configure a (static)
IP address subnet mask and gateway
IP address for the ZyWALL's LAN,
WAN, DMZ and WLAN interfaces.
3 Click Apply. The ZyWALL restarts.
Skip to
Section 5
if you have servers that
you need to be accessible from the WAN.
4 Internet Access Setup and Product Registration
1 Click the Wizard icon (
Internet access wizard.
All manuals and user guides at all-guides.com
ENGLISH
) in the HOME screen and then the Internet Access Setup link to open the
4
Publicité
