Télécharger Imprimer la page

Fisher-Price BGB07 Mode D'emploi page 14

Publicité

Setup and Use Installation et utilisation
Anchored End
Extrémité fixe
A
B
Free End
Extrémité libre
TIGHTEN
3
SERRER
To tighten the restraint belts:
• Feed the anchored end of the restraint belt
up through the buckle to form a loop
Pull the free end of the restraint belt
To loosen the restraint belts:
• Feed the free end of the restraint belt up
through the buckle to form a loop
Enlarge the loop by pulling on the end
of the loop toward the buckle. Pull the
anchored end of the restraint belt to
shorten the free end of the restraint
belt
.
B
Pour serrer les courroies :
• Glisser l'extrémité fixe de la courroie dans
le passant de façon à former une boucle
Tirer sur l'extrémité libre de la courroie
Pour desserrer les courroies :
• Glisser l'extrémité libre de la courroie
dans le passant de façon à former une
boucle
. Agrandir la boucle en tirant sur
A
l'extrémité de la boucle vers le passant.
Tirer sur l'extrémité fixe de la courroie pour
raccourcir l'extrémité libre
All manuals and user guides at all-guides.com
Anchored End
Extrémité fixe
B
A
Free End
Extrémité libre
LOOSEN
DESSERRER
A
B
.
A
.
B
4
.
.
Soothing Unit and Sounds
• Make sure your child is properly secured
in the seat.
• Slide the power switch to:
IMPORTANT! Low battery power causes
this product to operate erratically: no
vibrations and the product may not turn
off. Remove and discard the batteries and
replace with three new C (LR14)
alkaline batteries.
.
• Press the vibration button
A
.
vibrations on. Press again to turn it off.
B
Press the music
button to play sounds. Press again to turn
sounds off. Press the volume buttons
to adjust the volume level.
Unité de vibrations et sons
• S'assurer que l'enfant est bien attaché
dans le siège.
• Mettre l'interrupteur à :
ou
arrêt.
IMPORTANT! Si les piles sont faibles, il se
peut que les vibrations ne fonctionnent pas
ou que le produit ne s'éteigne pas. Retirer et
jeter les piles, et les remplacer par 3 piles
alcalines C (LR14) neuves.
• Appuyer sur le bouton des vibrations
pour actionner les vibrations. Appuyer une
autre fois pour les éteindre. Appuyer sur le
bouton de la musique
pour activer les sons. Appuyer une autre
fois pour arrêter les sons. Appuyer sur les
boutons
14
Power Switch
Interrupteur
On or
to turn
or sound effects
marche
ou des sons
pour régler le volume.
Off.

Publicité

loading