Publicité
Les langues disponibles
Les langues disponibles
Maintenance and cleaning
• This product does not require maintenance. There are no components located
inside the product that you need to maintain. Never open/dismantle the product.
Have maintenance and repairs done by qualified experts or repair shops only.
• Unplug the mini-B USB cable from GoPro before cleaning.
• To clean the product, a dry, soft and clean cloth is sufficient. You can use a long-
haired, soft and clean brush and a vacuum cleaner to remove dust.
• Never use any aggressive cleaning agents or chemical solutions as they may cause
damage to the housing or the product to malfunction.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection
of the environment.
Technical data
Directivity .............................................Cardioid
Frequency response ...........................20 – 20000 Hz
Sensitivity .............................................HI: -34 dB ±4 dB
Impedance ...........................................800 Ω ±30 %
Compatible with...................................GoPro Hero 3, 3 plus, 4
Power supply .......................................4 V/DC via mini-B USB
Operating conditions ..........................+5 to +45 ºC, 0 – 90 % RH
Storage conditions..............................-5 to +60 ºC, 0 – 90 % RH
Cable length .........................................15 cm
Dimensions (L × W × H) ......................52 × 97 × 49 mm (total)
Weight ...................................................36 g (total)
All manuals and user guides at all-guides.com
LO: -39 dB ±4 dB
52 × 32 × 26 mm (microphone)
16 g (microphone)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V1_1115_02-ETS-Mkd
Publicité
