Fimar MSD/300P Emploi Et Entretien page 46

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ BELL PACKAGING MACHINE MCD
TROUBLESHOOTING
The purpose of the following information is to help the operator to identify and correct any
anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abilities
and must only be performed by qualified personnel with recognised experience in the spe-
cific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 4: Operating malfunctions
Problem
The equipment does not start.
Message "OIL" appears on
GB
display.
FIMAR-RUSSIA.RU +7 495 989 1055
Causes
Main switch off.
No mains power.
Pump dirty.
- 22 -
Solutions
Turn on main switch.
Contact your dealer or
authorised service centre.
Carry out the cleaning cycle of
pump.
English language