Fimar MSD/300P Emploi Et Entretien page 34

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PACKAGING MACHINE WITH SEALING BAR MSD
G) Button (SEAL/PUMP): it activates the
hermetic sealing of bags with operation of
the equipment in "manual mode".
While the equipment operates in "only
vacuum mode", this button is pressed to
activate the external suction cycle.
H) Vacuum gauge: it detects the vacuum
generated by the equipment inside the
sags (for model MSD/400 - MSD/500 on-
ly).
RECOMMENDATIONS FOR USE
Language selection
1. Press the button (B) to start the appliance.
2. Press button (C) while display (A) keeps showing the welcome message.
GB
3. Press one of buttons (D-E) to select the desired language.
Lin0 - Italian
Lin1 - English
Lin2 - Spanish
Lin3 - German
Lin4 - French
4. Press button (C) to confirm the selection.
Operation in "manual mode"
1. Press the button (B) to start the appliance.
2. Wait until display (A) does not longer display the welcome message.
If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.
3. Press the button (C).
4. Press buttons (D-E) to select the temperature level of sealing bar.
It is recommended to select temperature level 4.
5. Press button (C) to confirm the selection.
6. Press button (F) to select the operation in "manual mode".
7. Insert the food product into bag.
8. Insert the bag opening into decompression chamber.
9. Lower sealing bar and keep it in position until display (A) shows value 8.
10. Press button (G) to seal the bag.
FIMAR-RUSSIA.RU +7 495 989 1055
B
C A
F
- 10 -
G
H
D
E
English language