Royal Sovereign ES-400C Mode D'emploi page 6

All manuals and user guides at all-guides.com
ES-400C
COLD LAMINATING PROCEDURE
NOTE: When switching the machine from the hot to cold mode, it will
take approximately 30 minutes for the ready indicator light to turn off.
Please wait for the light to turn off before inserting your document.
1. Turn the power switch to the cold position (" ="). The
power indicator light will not light, but the machine is
now ready to laminate in the cold mode.
2. Place the document to be laminated on the adhesive
side of the cold film with the document face down.
3. Insert the document to be laminated into the front
opening of the machine.
4. Remove paper liner from the cold film slowly while the
document is being inserted into the machine.
6