MOTION BLINDS CM-06 Mode D'emploi page 16

Reset the blind
i
It is possible to only delete end limits or to do a default factory reset.
A default factory reset will delete the end limits and remove the connection to any paired remote.
Press the program button on the motor to activate program mode.
.1
Delete end limits: To delete the end limits of the blind hold the program button
until the blind stops stepping for the first time, keep holding the button until the
blind stops stepping for the second time. (approximately 10 seconds)
Default factory reset: To reset the blind to the default factory setting hold the button for at least 20
seconds.The blind will stop stepping twice. After the second stop the blind will give one extra step to
confirm the default factory reset.
Reset bluetooth
i
16
Hold the button 10 seconds to reset the bluetooth pairing. Any
paired device will be reset.
Manual CM06V2.indd 16 Manual CM06V2.indd 16
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Shortly
press
Hold
10 s
10 s
20 s
2-7-2021 12:09:43 2-7-2021 12:09:43