Cleaning And Storage; Cleaning The Unit - Omron SoftTouch HV-F158-E Mode D'emploi

HV-F158 manual.book Page 15 Monday, June 14, 2010 2:46 PM

7. Cleaning and storage

■ Cleaning the unit

Clean with a lightly moistened cloth (or a cloth soaked in a
neutral cleaning solution) and wipe gently.
Do not use chemicals (like thinner, benzene).
Do not let water get into the internal area.
■ Jumbo Pad
When the Jumbo-pad gets dirty, it may affect the skin. In such a case wipe it
gently with a wet cloth. The stickiness will recover temporarily. Do not use too
much water.
Replacement of the Jumbo pads depends on each individual, but generally
after approximately 30 uses.
In case the pads are damaged, replace with the same Jumbo pads or with
OMRON Long-Life pads (E plus).
■ Packing up
 When you are packing  Leave the Jumbo-pad
up, pull the cord plug that has been used
from the jack. connected as it is to
the cord and attach to
the electrode holder
(one on each side).
■ Storage
• Do not keep the Jumbo pads and the unit in areas sub-
ject to direct sunlight, high temperature, humid area,
near to fire, vibration, or shock.
• Do not keep at places that can be easily reached by children.
• When not in use for a long period, to avoid liquid discharge
from batteries, remove the batteries before storage.
7.Cleaning and storage
 Wrap up the cord
around the pad.
EN
15