ENGLISH
After use
• Remove the plug from the socket before
leaving the appliance unattended and
before changing, cleaning or inspecting
any parts of the appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may a ect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Do not use the appliance if the rotary
sieve is damaged.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be
repaired by an authorised repair agent in
order to avoid a hazard. Do not cut the
power supply cord and do not attempt
to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
4
All manuals and user guides at all-guides.com
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
wire is required
• To avoid the risk of electric shock, do not
• Check that the supply voltage shown on
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live
• Connect the blue lead to the neutral
• If the product is class I (earthed),
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal.
• Follow the fitting instructions supplied
• Any replacement fuse must be of the
This appliance is double insulated
in accordance with
IEC 60335-2-14; therefore no earth
immerse the cord, plug or motor unit in
water or other liquid.
the rating plate of the appliance matches
that of your electrical system. Any
connection error will invalidate the
guarantee.
terminal of the new plug.
terminal.
connect the green/yellow lead to the
earth terminal.
with good quality plugs.
same rating as the original fuse supplied
with the product.