Functional Description - Makita BFL201R Manuel D'instruction

(For Canada only)
IC Notices
CAUTION: Operation is subject to the following two
conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference,
including
undesired operation of the device.
CAUTION: The installer of this radio equipment must
ensure that the antenna is located or pointed such that it
does not emit RF field in excess of Health Canada limits
for the general population; consult Safety Code 6,
obtainable from
www.hc-sc.gc.ca/rpb
interference that may
Health Canada's

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before adjusting or
checking function on the tool.
cause Installing or removing battery cartridge
1
website
2
007918
Always switch off the tool before insertion or
•
removal of the battery cartridge.
To remove the battery cartridge, withdraw it from
•
the tool while sliding the button on the front of the
cartridge.
To insert the battery cartridge, align the tongue on
•
the battery cartridge with the groove in the housing
and slip it into place. Always insert it all the way
until it locks in place with a little click. If you can see
the red part on the upper side of the button, it is not
locked completely. Insert it fully until the red part
cannot be seen. If not, it may accidentally fall out of
the tool, causing injury to you or someone around
you.
Do not use force when inserting the battery
•
cartridge. If the cartridge does not slide in easily, it
is not being inserted correctly.
Switch action
007914
CAUTION:
Before inserting the battery cartridge into the tool,
•
always check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
5
1. Red part
2. Button
3. Battery cartridge
3
1. Switch trigger
1