Conrad 75 21 68 Notice D'emploi page 36

• The alarm can be terminated at any time and the alarm system be disarmed by
setting the "mode selection switch" to "OFF". The system can also be disarmed
by an external key switch.
Perform the system test again to test the alarm zone 1 sensors.
11. System Status Explanation
The system status is displayed by the status LED "EXIT".
An external status LED (see chapter "7.7 Connection of an External Status LED")
can also be connected to the alarm system. The external status LED has an identi-
cal function to the status LED "EXIT".
Status LED
Off
Flashing quickly
Flashes slowly
36
All manuals and user guides at all-guides.com
Meaning
System disarmed
System armed
Entry or
exit delay
active
Explanation
Only the function of the
internal door bell is available. It can
be activated by the correspondingly
connected button.
This system status is present when
the "mode selection switch" is set to
"OFF".
The system is armed.
The entry or exit delay
is currently active.