Télécharger Imprimer la page

Munchkin Steam Guard Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

Munchkin Steam Guard
microwaves between 500 – 1850W
Please read instructions before use and retain for future reference. The Munchkin
Steam Guard
Microwave Sterilizer uses the speed and convenience of your
microwave to sterilize baby feeding equipment in minutes.
As well as breast and bottle feeding accessories, you can sterilize any other items
that are suitable for microwave use and can be boiled. If in doubt, please contact
the manufacturer.
WARNING: DELUXE BOTTLE BRUSH INCLUDED WITH STERILIZER SHOULD NOT
BE STERILIZED IN THIS UNIT. The Deluxe Bottle Brush is included for pre-washing
bottles and bottle accessories. It contains metal components which are prohibited
from microwave use. Attempting to sterilize the Deluxe Bottle Brush in the micro-
wave is a potential fire hazard. The Deluxe Bottle Brush may be cleaned in the
dishwasher on the top rack.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE DAMAGE
TO THIS PRODUCT AND/OR YOUR MICROWAVE.
• Always add 7 fl. oz. of water before each use. We recommend using distilled
water, as it reduces mineral deposits.
• Do not use bleach or chemical sterilizing solutions/tablets in your steam sterilizer
or on products to be sterilized.
• In combination ovens, ensure grill is switched off and has cooled before use.
• Always follow loading instructions and do not overload.
• When sterilizing any feeding items, simply arrange the components within the rack
ensuring that steam can effectively circulate in and around all surfaces.
• Always allow at least 2 minutes cooling time before removing the sterilizer from
the microwave.
• When removing from the microwave, USE CAUTION – the sterilizer will still be hot.
• USE CAUTION when removing lid as steam will escape.
• Do not carry sterilizer using lid handle.
• Keep out of reach of small children.
Contents (see diagram A)
1
A
2
a
3
Microwave Sterilizer for
a
b
c
d
a
1. Lid
a – Lid Handle
2. Bottle/Accessories Rack
a – Central Stem/Tongs
b – Dome cap holders
c – Crescent-shaped holders
d – Arrow-shaped notches
3. Base
a – Side catches for transport
1

Publicité

loading