Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
• When the accessory is in operation, care should be taken not to distract the operator's attention.
• Before using the accessory, the operator has to have an unobstructed view of the operating area, which has to be suitably lit, to
avoid accidents to personnel and damage to the tools and equipment.
• The operator should not leave the accessory unmanned for long periods of time when under load. If this is not possible, the
operator has to ensure that there is no danger to personnel or equipment.
DESCRIPTION OF THE CARRIAGE
The thrust or chain driven carriage for Robur hoists is suitable for the fixing and horizontal movement of portable hoists, moved by
hand or chain, on structural beams (such as INP, IPB, IPE, HEA, HEB, etc).
It is built using high quality materials and is of compact, lightweight, easy to handle design. It is portable and easy to install, due to
the drawbar eye fixed to a regulator pin with right and left threading.
Movement takes place by pushing the carriage in the required direction in the case of the thrust driven model, or by adjusting the
guide chains in the chain driven model.
TECHNICAL SPECIFICATIONS
TABLE "A"
81470005
81470010
81470020
81470030
81470050
SAFETY FACTOR: 4
10
PUSH TROLLEYS 8147S
A
B
200
175
295
238
186
304
270
215
312
320
268
330
360
306
335
Fig. 1
C
E
F
30
25
35
30
47
40
56
48
68
60
EN
L min
L max
WLL
50
220
0.5 t
58
220
66
220
74
220
90
220
I
1 t
2 t
3 t
5 t
Publicité
