Publicité
Les langues disponibles
Les langues disponibles
Setup
Connection Setting For Surround Back
Settings for the surround back speaker differ depending on the connection method and installation site
of the speaker to be connected. You must confi gure the 7.1 CHANNEL settings according to the
connected speaker before you listen to music properly.
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
2.
Press the ▲▼ buttons to select SPEAKER, and then press the
ENTER button.
3.
Press the ▲▼ buttons to select 7.1 CHANNEL, and then
press the ENTER button.
4.
Press the ▲▼ to select a proper setting for the surround back
speaker.
•
SURR.BACK : Select this if you want to install the surround
back speaker in the default settings. With this setting, you can
enable the Dolby Pro Logic IIx mode.
•
PLIIz : Select this if you want to install the surround
back speaker in the top front corner. With this
setting, you can enable the Dolby Pro Logic IIz
mode.
✎
NOTE
Depending on the 7.1 CHANNEL settings, the surround back speaker or front height speaker
menus may not be activated or may differ in the speaker menu:
SPEAKER SIZE, SPEAKER LEVEL, SPEAKER DISTANCE.
Depending on your setting, you may not use different features simultaneously.
If you set SURR-BACK, for instance, you cannot use the following feature: PLIIz.
34
English
HW-D600_D650S_XAC_0614.indd 34
HW-D600_D650S_XAC_0614.indd 34
All manuals and user guides at all-guides.com
INPUT
SPEAKER SIZE
7.1 CHANNEL
SURR.BACK
SPEAKER
SPEAKER DISTANCE
PLIIz
SPEAKER LEVEL
Q
SURROUND
TEST TONE
OPTION
> MOVE
' RETURN
SELECT
EXIT
2011-06-17
2011-06-17
10:35:20
10:35:20
Publicité
