Samsung HW-D600 Guide D'utilisation page 16

Connections
Connecting Speaker Wire
1. Loosen the knob by turning counterclockwise.
2. Insert the bare part of the wire into the hole in the side of each
terminal.
3. Tighten the knob by turning clockwise to secure the wire.
ACTIVE SUBWOOFER
(not supplied)
ONLY FOR
UPDATE
ONLY FOR
SERVICE
✎
NOTE

Speakers are provided with model HW-D650S only. Model HW-D600 does not come with
speakers. Contact a Samsung Electronics retailer for purchasing.

Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands
or objects into the duct (hole).

Never touch speaker terminals while the power is on. Doing so could result in electric shock.

Make sure the polarities (+ and -) are correct.

If you want to use a active subwoofer speaker (not supplied), connect a subwoofer speaker into
the SUBWOOFER OUT terminal in the rear panel.

By using an external amplifi er, you can connect the surround back speakers (SBL/SBR) or front
height speakers(FHL/FHR) to improve your system up to a 7.1 channel system.
16
English
HW-D600_D650S_XAC_0614.indd 16 HW-D600_D650S_XAC_0614.indd 16
All manuals and user guides at all-guides.com
Connecting the Speakers
SUBWOOFER
FRONT (R) SURROUND (R)
SUBWOOFER
OUT
SURROUND SURROUND
BACK OUT BACK OUT
SUBWOOFER
OUT
SURROUND (L)
CENTER FRONT (L)
Model HW-D600
AV Receiver HW-D600
Model HW-D650S
AV Receiver HW-D600
FRONT SPEAKER PS-FC560S
CENTER SPEAKER PS-CC560S
SURROUND SPEAKER PS-RC560S
SUBWOOFER SPEAKER PS-WC560S
2011-06-17 2011-06-17 10:34:43 10:34:43