Vizio V Serie Manuel De L'utilisateur page 17

The LED indicators will behave differently with each function.
Function
Input
Bluetooth
DTS TruVolume
DTS Virtual:X
Equalizer Mode
LED Behavior
Press the INPUT button to cycle through the available inputs. Press and hold the INPUT
button on the remote control for 4 seconds to enable the auto input detect function.
The LED indicator Specific inputs will show a different LED color:
color will change per
•
specific input.
•
•
When searching for
Press and hold the
device: flash from
minutes. You can now search for the sound bar (VIZIO V21) using your Bluetooth Device.
bottom to top and back The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar
continuously
TruVolume On
Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume
provides a consistent and comfortable volume level for a more enjoyable listening
experience.
TruVolume Off
Virtual:X On
Press the VRT:X button to enable/disable Virtual:X. When enabled (On), all inputs will
produce a virtual sound technology that simulates the effect of having overhead sound.
When disabled (Off), all sources will playback in stereo.
Virtual:X Off
Press the EQ button and use the Up/Down buttons to toggle between preset equalizer
settings: Movie, Music, Dialogue, and Game.
Note: Movie mode is on by default.
AUX In: Green
AUX VA: Violet
Digital Optical: Red
button on the remote. The sound bar will be discoverable for 15
Mode & Level Settings
LED Indicators are located here.
Description
• HDMI (ARC): Magenta
• Bluetooth: Blue
• USB: Orange
ENG - 13