Uline H-1381 Mode D'emploi page 2

5. Press down on the handle until blade punctures
drum head. Raise the handle and slide drum
opener to make your next cut. (See Figures 6-7)
Figure 6
Figure 7
CAUTION! Keep left hand firmly on drum
opener throughout the cut. Do not place on
drum chime while cutting!
1. Lubricate moving parts periodically.
NOTE: Check bolts and nuts frequently for
tightness. If any parts are loose, remove unit
from service and repair.
PAGE 2 OF 6
OPERATION CONTINUED
6. Repeat until cut is complete. (See Figures 8-9)
MAINTENANCE
1-800-295-5510
uline.com
Figure 8
Figure 9
CAUTION! Cut edges are sharp! Use caution
when removing drum head.
CAUTION! If cut edge on drum becomes
rough, the blade may be worn and should be
replaced.
0521 IH-1381