Young America BTK-3230 Instructions D'installation page 9

Figure 6.
Figure 7.
Attaching the Conversion Kit
Figure 9.
Step 4:
Before attaching the Toddler Bed/Daybed

Conversion Kit to your Crib the Mattress
Platform must be placed in the lowest posi-
tion. See Figure 6. Refer to page 13 in
your Crib Instruction Booklet. Do not reat-
tach the Footboard.
Locate the (4) 2 3/8" Connector Bolts from

the Crib Footboard to use in the attachment
of the Conversion Kit.
Position the Conversion Kit with the

Brackets on the Frame Bottom Rail facing
the inside of the bed. See Figure 7.
Align the holes in the Frame Posts with the

holes in the Crib Ends. Insert (4) 2 3/8"
Connector Bolts (that were removed from
the Crib Assembly) from the inside of the
Crib Ends into the Frame Posts and se-
curely tighten with the provided wrench.
See Figure 8.
Figure 9 illustrates how the completed

Toddler Bed should look.
After assembly is completed check all as-

sembly bolts and make sure each is se-
curely tightened using the provided
wrench.
9
Figure 8.