Young America BTK-3230 Instructions D'installation page 6

Step 1:
Attach the Frame Posts to the Frame Bottom Rail. See Figure 1.

Insert the Barrel Nuts into the holes on the inside of the Frame Bottom Rail (make

sure the slotted end of the Barrel Nut is visible) using a Flathead Screwdriver align
the slot in the Barrel Nut with the hole for the connector bolt. See Figure 2.
Insert (2) 3 1/2" Connector Bolts from the outside of the Frame Posts and tighten

with the provided wrench. See Figure 2b.
Figure 2.
Conversion Kit Assembly
Figure 1. Attach Frame
Posts to Frame Bottom Rail
6
See
Figure 2
and 2b.
Figure 2b.
Figure 3.