Young America BTK-3230 Instructions D'installation page 8

Step 3:
Slide the Safety Rail Brackets through

the saddle brackets in the Frame Bottom
Rail. See Figure 4.
Attach the Safety Rail Brackets using (2)

3/4" Connector Bolts, (2) 3/4" Caps, and
(2) Flat Washers. See Fig. 5. Tighten
with the provided Wrenches.
Insert (1) 3/4" Bolt into the unused hole

on the opposite Frame Post and tighten
with the provided wrench. See Figure 6.
When the Toddler Bed Guard Rail is re-

moved to convert the bed into a Daybed,
insert (1) 3/4" Bolt into each Frame Post
as shown in Figure 6.
Figure 5.
Washer
Wrench
Cap
Figure 7.
Assembled
Conversion Kit
Conversion Kit Assembly
Bolt
8
Figure 4.
Figure 6.