TaoTronics TT-AD003 Mode D'emploi page 4

Product Diagram
①
Mist Outlet
② Tank Cover
③
Base
④ CANDLE Button
⑤
COLOR Button
⑥ HIGH/LOW Button
⑦
MIST Button
① Maximum Water
CANDLE Button
When the light is off or turned on in COLOR mode, press the CANDLE Button once (indicated by a
beep sound) to activate a ickering warm LED candle light. Press again and the candle light will
turn solid, again indicated by a beep sound. Press and hold the CANDLE Button for 1.5 seconds to
turn the candle light off.
When the candle light is turned on, press the COLOR Button (a beep sound will be heard) to
switch to color lighting.
COLOR Button
• Press the COLOR Button once (a beep sound will be heard) to automatically cycle through
different colors.
• Press the COLOR Button again to manually cycle through the different colors. Each color has a
dim and bright tone. Press and hold the COLOR Button for 1.5 seconds to turn the color light off
(two beep sounds will be heard).
HIGH/LOW Button
• The diffuser is set to high mist by default when turned on (two beep sounds). You can press the
HIGH/LOW Button to switch to low mist (one beep sound).
MIST Button
• Press the MIST Button once to turn on the 60 minute mist timer (the corresponding LED indicator
All manuals and user guides at all-guides.com
①
②
60 120 180 ON
CANDLE COLOR HIGH/LOW MIST
③
④ ⑤ ⑥ ⑦
①
②
③
② Water Tank ③ Tank Cap
① Air Inlet
Adding Water
- Remove the cover and the tank cap.
- Add up to 300 mL water into the water tank.
- Add 2 to 3 drops (0.1 to 0.15 mL) of essential oil into the water.
- Put the cover and cap back on.
How to Use
Connect the power adapter. The diffuser is now in standby status. Make sure there is enough
water inside the tank. Use the CANDLE Button to control the candle light. Use the COLOR Button to
control the color of the light. Use the MIST Button to set the mist timer and turn misting on/off, and
the HIGH/LOW Button to adjust between high and low mist mode.
Important
- Do not exceed the max level when adding water.
- Stop using when water in the water tank is depleted.
- Do not power on when the lid is not properly covered.
- Use with essential oil and water together. Never use with essential oil only.
- Only use with natural essential oil. Synthesized essential oil may damage the product.
Cleaning the Water Tank
- Unplug the power cord and take off the tank cover and the tank cap.
- Drain any remaining water from the tank.
- Add some warm water into the tank and mix with detergent, wash with a cleaning cloth.
- Do not use corrosive detergent for cleaning.
Caution
- Please do not repair the product by yourself, always ask a professional electrician or authorized
technician for repairs.
- If you smell a bad odor or anything unusual, please turn off the unit immediately.
- Please do not remove the power plug with wet hands as it may cause electrical shock.
- Do not place this unit on a slope or uneven surface to avoid water leaking or component damage.
①
②
DC 24V
② DC Socket
03/04