Baby Jogger City Go Mode D'emploi page 18

All manuals and user guides at all-guides.com
ADJUSTING THE HANDLE
1 There are 4 positions:
A - In vehicle/carry position
B/C - Middle positions
D - Stationary position
2 To adjust, squeeze handle release buttons on
both sides, then rotate the handle. The handle
will lock into position.
3 You should hear a click when the handle
button is engaged and handle is locked into
the upright carrying position.
WARNING:
is securely locked in the upright carrying
position before carrying.
ADJUSTING THE HARNESS
4 Adjust the shoulder straps height so they
are level with, or just below, the child' s
shoulders.
5 To adjust the height of the shoulder straps,
remove the straps from the splitter plate
located in the rear of the seat.
Always make sure the handle
15