Publicité
Les langues disponibles
Les langues disponibles
2/ PREPARING YOUR APPLIANCE
A. Description of the kettle
B. Before using your kettle
For the first time to use or no use for a long time, it is recommended that you fill to the maximum
level mark with fresh tap water, boil and empty the kettle at least 2 times to clear kettle of any tiny
particles. Do not drink such water.
3/ USING YOUR APPLIANCE
1. Put the power stand on a clear and smooth surface
2. Press the lid opening button on the lid.
3. Remove the kettle from the base to the filling place. Fill the kettle with desired amount (no
less than the minimum amount and no more than the maximum). The level is noted inside the
kettle.
4. Place the kettle back on the power base.
5. Connect the plug into a power outlet (220-240V, AC) and press the on/of switch on the right
of the control panel. The function 100°C starts to blink. The user could select any other
function by pressing the setting button on the left within 3 seconds (when the 100℃ indicate
light is still blinking) or the kettle would start to work with 100°C as target function. When
100°C setting starts to work, there's a long beep. For having another setting, press the setting
Lid release button
Handle
Stainless steel body
Button ON / OFF
Tactile panel control
Power base
Setting button
10
Publicité
