WilTec 50790 Mode D'emploi page 26

Maintenance
 Inspect the cable before each work day. Replace it at
the first sign of wear (refer to the instructions supplied
with the replacement cable).
 Occasionally oil the cable pulleys. Crank up the tele-
scoping sections for access to the internal cable pulley.
Never allow oil or grease to contact the surface of the
winch brake drum.
 Occasionally oil the caster bearings.
 If the telescoping sections of the frame don't operate
smoothly, apply household paraffin to the sliding surfac-
es.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
All manuals and user guides at all-guides.com
Seite 26