Publicité
Les langues disponibles
Les langues disponibles
RECOMMENDED SPEED SETTING
Grinding stones (Fig. D)
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Felt wheels and tip (Fig. E)
The felt wheels or tip should be screwed on the
mandrel.
Material
Steel
Aluminium, brass
Plastic
Sanding bands and disc (sanding disc not included)
(Fig. F)
Material
Wood
Steel
Aluminium, brass
Plastic
Bristel brush (Fig. G)
Material
Stone, shell
Aluminium, brass
High speed cutter, Diamond wheel point and Drill
(Fig. H)
Material
Stone, shell
Steel
Aluminium, brass
Plastic
WWW.VONROC.COM
Abrasive disc (Fig. I)
Speed setting
1-3
3-5
2-4
5. MAINTENANCE
1-3
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
Speed setting
the machine housing with a soft cloth, preferably
3-5
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a
2-4
soft cloth moistened with soapy water. Never use
3-5
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Please clean the tool immediately after use.
ENVIRONMENT
Speed setting
4-5
1-3
2-4
1-3
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Speed setting
Equipment and its implementation into national
2-4
right, power tools that are no longer usable must
be collected separately and disposed of in an
2-4
environmentally friendly way.
WARRANTY
VONROC products are developed to the highest
Speed setting
quality standards and are guaranteed free of
5
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
2-4
original purchase. Should the product develop any
4-5
failure during this period due to defective material
1-3
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
Material
Steel
Aluminium, brass
Plastic
Make sure that the machine is not live when
carrying out maintenance work on the motor.
Damaged and/or disposed of electrical or
electronic devices must be dropped off at
recycling stations intended for that purpose.
EN
Speed setting
3-5
2-4
1-3
11
Publicité
