Publicité
Mount the Doorbell on Surfaces Made Out of Hard
Materials
1. If you're mounting the doorbell on a surface made out of hard materials, like
brick, concrete, stucco, drill 2 holes through the Screw Hole Positioning Card
with a 15/64"(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to secure the
Mounting Bracket on the wall.
What is required: Power Drill, 15/64"(6 mm) Drill Bit, Mounting Bracket, 15°
Mounting Wedge (Optional), Screw Packs
Power Drill
15/64"(6 mm) Drill Bit
(not provided)
14 English
Mounting Bracket
15° Mounting
Screw Packs (Spare screws
(Attached to 15° Mounting
Wedge (Optional)
and anchors are included.)
Wedge)
Wall
Mounting
Bracket
Without 15° Mounting Wedge
2
Wall
Mounting
Mounting
Wedge
Bracket
With 15° Mounting Wedge
2
English 15
Publicité
