Place the Screw Hole Positioning Card against the wall to mark the position.
12 English
STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you're mounting the doorbell on a wooden surface, you don't need to pre-drill
pilot holes. Use the provided screws to secure the Mounting Bracket on the wall,
The Screw Hole Positioning Card indicates the position of the screw holes.
What is required: Screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional),
Screw Packs
Mounting Bracket
Phillips-Head Screwdriver
(Attached to 15° Mounting
(not provided)
Wedge)
Wall
Mounting
Bracket
Without 15° Mounting Wedge
15° Mounting
Screw Packs (Spare screws
Wedge (Optional)
and anchors are included.)
Wall
Mounting
Mounting
Wedge
Bracket
1
With 15° Mounting Wedge
English 13