RCA 25210 Mode D'emploi page 23

All manuals and user guides at all-guides.com
Reviewing the Redial Numbers
Your phone records up to three previously dialed phone numbers.
1. When the phone is idle, press the Redial button.
2. Use the VOL (+ or -) button to view the last three previously dialed
numbers.
3. While the preferred number is displayed, press the Spk, Talk, or a Line
button to dial the phone number.
NOTE: If you do not select a Line button, the line is automatically held and
the number is dialed accordingly.
Storing a Redial Record in Phone Book
1. Make sure the phone is OFF (not in Talk mode).
2. Press the Redial button, then use the VOL (+ or -) button to scroll to
the desired redial number.
3. Press the SAVE soft key.
4. The screen displays "Enter Name". Input a name. Please refer to section
"Handset Name" for name editing method.
NOTE: A name must be input otherwise the record cannot be stored.
5. Press the SAVE soft key. The desired redial number is displayed on the
screen.
6. You can edit the telephone number.
7. Press SAVE soft key to enter the VIP Tone Melody selection.
Transferring a Call to Another Extension
1. Press XFER soft key when the phone is in Talk mode.
2. Use VOL (+ or -) to select the desired handset or base you want to
transfer to, and then press the SELECT soft key.
3. The unit will intercom the selected handset or base, and it will ring for
this intercom call. At this moment, the call is on hold.
4. Once the selected handset answers the intercom call, after the call
transfer initialized unit hangs up, the call can be transferred to the
desired handset or base, or press the CONF soft key to enter conference
call mode.
5. If the selected unit rejects the intercom call, the call transfer initialized
displays "Unavailable" on the screen for 3 seconds, and then you can
pick up the call again.
Receiving a Transferred Call from Another Extension
If the unit receives a transfer call paging, the screen displays "Intercom call
from base/Handset X". Press the Talk button (handset only) or Speaker but-
ton (both base and handset) to answer the call.
If you press the REJECT soft key, the intercom paging will be stopped.
Telephone Operation
2