Kohler K-110 Instructions D'installation page 16

Stem
Extension
Bath Adapter
Open
Close
Shown in Closed Position
13. Multi-Piece Lever Handle Installation
Verify that the valves are in the closed position.
NOTICE: Risk of product damage. Do not overtighten.
Overtightening will damage the handle.
Install the stem extension to the valve stem.
Thread the bonnet onto the valve body.
Align the bath adapter over the stem extension so that the holes
line up horizontally. Secure with the screw.
Install the skirt cap to the end of the bath adapter.
Position the long sleeve over the handle arm.
Slide the O-ring onto the handle arm down to the long sleeve.
Insert the handle arm through the bath adapter.
Slide the short sleeve onto the handle arm up to rest on the bath
adapter.
Slide the washer onto the handle arm down to the short sleeve.
Thread the end cap onto the end of the handle arm to secure the
assembly.
Repeat for the other handle.
1008209-2-G
All manuals and user guides at all-guides.com
Short Sleeve
Endcap
Washer
Stem Screw
Skirt Cap
Bonnet
O-Ring
Long Sleeve
Handle Arm
Open
Close
16 Kohler Co.