GE 21095 Mode D'emploi page 33

4. When the receiving party answers the page, the intercom is activated.
When the intercom is setup the following information shows in the display:
INTERCOM
HANDSET 1
THE SENDING PARTY
5. When finished, press the EXIT button on base or exit/answerer button
on handset or the page/int button on either handset or base to
deactivate the intercom.
NOTE : During the intercom, if a handset is assigned a name, that name is
displayed instead of handset number.
R I
ECEIVING AN
When an intercom call is received, the handset or base beeps. To answer
the intercom call, press the page/int or speaker/callback button on the base
or the talk/callback button on the handset.
R E
ECEIVING AN
If you receive a telephone call during an intercom call, the intercom is
automatically disconnected so you can answer the call. Press the talk/callback
button on the handset or speaker/callback button on base to end the intercom
first, and then press the talk/callback button on the handset or speaker/
callback button on base again to answer the external telephone call.
U I
SING NTERCOM OR
During an external telephone call, you may page other handsets and have
off-line, private intercom conversations between an external caller and the
handsets, or you may have a 3-way conference with external line and
another handset or the base.
All manuals and user guides at all-guides.com
C
NTERCOM ALL
T
XTERNAL ELEPHONE
C
ONFERENCE WITH
INTERCOM
HANDSET 1
THE RECEIVING PARTY
C D
ALL URING AN
E
XTERNAL
I C
NTERCOM ALL
C
ALLS
33