Testboy TB-2200 Mode D'emploi page 15

Safety precautions
®
The Testboy TB-2200 left our factory in a technically safe and flawless condition.
In order to maintain this condition, the user must observe the safety notes con-
tained in this manual.
Caution!
- This operation manual contains information and notes required to operate and
use this instrument safely. Before using this instrument, you must read this opera-
tion manual with due care and attention and adhere to all aspects. Failure to ob-
serve the instructions, warnings and notes could lead to serious or life-threatening
injuries to the user or damage to the instrument.
- In order to avoid an electrical shock hazard you must observe the specified pre-
cautionary measures when working with voltages greater than 70 V (35 V) DC or
33 V (16 V)eff AC. These values represent the specified limits of safe-to-touch
voltages in accordance with DIN VDE (values given in brackets apply to medical or
agricultural applications).
- Before taking each measurement, ensure that the test leads and the measuring
instrument are in a flawless condition.
- The test leads and test probes must only be handled using the isolated grips.
Avoid touching the tips of the test probes under all circumstances.
- The person responsible or user should refer to the operating instructions to guar-
antee safety. If the instrument is not used in line with the manufacturer's specifica-
tions, the safety provided by the instrument may be impaired.
- No part of the instrument or its accessories may be replaced by any parts other
than parts certified by the manufacturer or the manufacturer's suppliers.
Attention!
- The test instrument must only be used for the specified measurement range.
- Each time before use, inspect the instrument to ensure that it is working faultless-
ly (for example, on known source of voltage). Please also refer to DIN VDE 0105,
Part 1.
- The Responsible body or operator should refer to the instruction manual to pre-
serve the protection afford by the equipment. If the equipment is used in a manner
not specified by the manufacturer, the protection provided by the equipment may
be impaired.
- Any parts of the device and its accessories are not allowed to be changed or re-
placed, other than authorized by the manufacturer of his agent.
- 15 -