12
WIRING INSTRUCTIONS
•
IMPORTANT: If you are not sure if the
electrical outlet box and fan are
grounded, contact a licensed electrician
for advice. The outlet box and fan must
be grounded for safe operation.
•
WARNING: To avoid possible electric
shock, be sure electricity is turned off at
the main fuse box before wiring.
•
Insert the receiver into the mounting
bracket with the flat side of the receiver
facing the ceiling.
•
Once the connection has been made,
the receiver inserts into the drop rod
hanging bracket. The canopy comes up
to cover the receiver and bracket.
•
Make wire connections from the fan to
the receiver.
From fan
2-pin connector----------2-pin connector
3-pin connector----------3-pin connector
•
Make wire connections from the receiver
and fan to the outlet box as follows, using
the wire nuts.
From receiver
Black wire "AC in L" -------Black wire (hot)
White wire "AC in N" ----------White wire (neutral)
•
From fan and receiver to outlet box
Green wires --------------- Green (ground)
•
Turn the wire nut connections upward,
spreading them apart so the green
(ground) and white wires will be on one
side of the outlet box and the black wire
will be on the other side. Carefully tuck
the connections up into the outlet box.
To receiver
To outlet box
15
05
Leave unconnected
and do not cut.
Receiver
Black
White
Outlet Box
Mains cables
2-pin and
3-pin
connectors
Ground
conductor