NOMA Landon Guide D'utilisation page 14

ASSEMBLY
Cross Pin
Setscrew
08
Carefully reinstall the hanger ball onto
the downrod, being sure that the cross
pin is in the correct position, the setscrew
is tightened and wires are not twisted.
WARNING: Ensure no wire is pinched,
twisted or damaged during this step.
Tab
10
Carefully lift the fan motor assembly up
to the mounting bracket. Make sure the
tab on the mounting bracket socket is
properly seated in the groove in the
hanger ball/downrod assembly.
Downrod
Hanger Ball
Canopy
Canopy
09
Ring
If a longer downrod (not included) is
needed, be sure to snap together the
2-pin and 3-pin connectors, the two
male plugs from the fan and female
plugs from the extension cord.
Ceiling
Groove
11
Secure the safety cable to the building
structure using a wood screw and
washers.
14
Hanger Ball
Canopy
Canopy
Ring
Wood Screw
And Washer
Safety Cable