Domo MB010 Mode D'emploi page 52

8. Remove the bottom hinge and remove the pin. Rotate the hinge 180° and reinsert the
pin.
9. Remount the hinge on the appliance on the other side. Put the adjustable feet back into
position. Fasten the bottom door to the appliance.
10. Remove the pin from the centre hinger. Rotate the centre hinge 180° and put the pin
back in. Fasten the hinge onto the refrigerator.
11. Place the upper door back on the appliance. Mount the upper hinge and put the cover
plate on it. Check carefully that the door is properly aligned horizontally and the door
gasket closes completely.
12. Set the refrigerator upright again.
52
Domo MB010
unscrew
screw