Behringer U-PHONO UFO202 Mode D'emploi page 25

All manuals and user guides at all-guides.com
25 U-PHONO UFO202 User Manual
3. Operating Elements
and Connections
(4) (3)
(7) (8)
(1) L AND R RCA OUTPUTS: Connect an external monitoring
device, such as a pair of monitor speakers, to the left and
right RCA outputs. (this step is optional)
(2) L AND R RCA INPUTS: Connect the audio source (record
player, tape player, etc.) to the left and right RCA inputs.
(3) GROUND CONNECTION: Some record players have a
separate ground cable. If so, attach the cable to the
ground terminal to avoid excessive noise and hum.
(4) LINE/PHONO SWITCH: Move the switch on the top left
to PHONO if transferring from a record player. For all other
sources, select LINE.
◊ ◊ Note: The PHONO inputs only support moving
(2) (1)
(5) HEADPHONES OUTPUT: Plug your headphones into the
(6) HEADPHONES VOLUME: Adjust the headphones volume
(7) USB CABLE: Plug the USB cable into a free USB port on
(8) POWER INDICATOR: Upon connection, the UFO's
(5) (6)
4. Software Installation
• •
• •
magnet cartridges. These are the most common type,
so unless you know your player uses a moving coil
cartridge, assume that your system will work.
PHONES output using a / " mini plug.
1
8
with the adjacent control.
your computer.
power indicator will light up and the computer should
automatically recognize the connection.
This device requires no special setup or drivers, just plug it
into a free USB port on a PC or Mac computer
A free download of Audacity audio editing software
is available on behringer.com. Simply navigate to the
UFO202 product page, click the download tab, and scroll
down to the Apps section where you can download the
'Audio Software for Windows' or 'Audio Software for Mac'
bundle. This will help make the transfer process quick and
simple. You can, of course, use another audio program of
your choice.