Simons Voss Technologies SmartRelais-3-Controller Guide Abrégé page 42

All manuals and user guides at all-guides.com
SmartRelais-3-Controller
Circuit
No.
board
1 -
2 +
3
4
5
6
7
8
9 +1
10 -
11 B1
EN
Explanation
GND Optional connection of an external power sup-
ply (ground).
V . Connection of an external power supply (posit-
IN
ive pole).
Relay 1: NO (Normally Open). This contact is con-
nected to C when the relay switches.
Relay 1: C (Common). Common connection of the
changeover contacts.
Relay 1: NC (Normally Closed). This contact is dis-
connected from C when the relay switches.
Relay 2: NO (Normally Open). This contact is con-
nected to C when the relay switches. Availability in
the controller depends on the firmware.
Relay 2: C (Common). Common connection of the
changeover contacts. Availability in the controller
depends on the firmware.
Relay 2: NC (Normally Closed). This contact is dis-
connected from C when the relay switches. Availab-
ility in the controller depends on the firmware.
Reader 1: Power supply. Voltage corresponds to V
1 V or 12 V - 1 V (PoE).
Reader 1: GND
Reader 1: Data line B.
5. Connections
-
IN
35 / 148