All manuals and user guides at all-guides.com
SmartRelais-3-Controller
1 Intended use
2 General safety instructions
Signal word (ANSI Z535.6)
DANGER
WARNING
CAUTION
EN
SimonsVoss SREL3 (SREL3) is an electronic switch
which can be activated with suitable ID media such as
transponders . LSM 3.3 SP2 or higher is required to use
the SREL3.
SmartRelays may only be used for the purposes
described in this manual. No other use is permitted as
it may cause damage to the SmartRelay.
The SREL3 is a networked control unit consisting of a
controller and reader. Up to 3 external readers
(SREL3.EXT.G2.W[.WP]) can be connected via an
RS485 interface. The external reader can be ordered
as a separate unit and operated with both active and
passive credentials. The controller features
configurable inputs and outputs.
In the advanced version, the controller can be linked to
the mains via Ethernet (PoE-capable). SREL3
Advanced can be used as a gateway in a virtual
network (VN) or operated with an optionally available
additional SmartOutput module.
Possible immediate effects of
non-compliance
Death or serious injury (likely)
Death or serious injury (possible,
but unlikely)
Minor injury
1. Intended use
25 / 148