Publicité
Starting and Running the Pump
The pump can be operated in REMOTE mode through the Remote I/O
signals or in SERIAL mode through the RS232 or RS485 Serial
communication.
The defult configuration is REMOTE mode.
To allow the pump starting you have to wire properly the START pins by
NOTE
connecting the mating connector provided with the pump or by connecting pin 7
to pin 9 on J1 – I/O connector.
MS120 Single Stage Rotary Vane Pumps User Manual/87-900-150-01 (C.00)
Technical Information
Starting and Running the Pump
5
171/193
Publicité
Chapitres
